Bedside Rack System | Chevrolet Silverado HD & GMC Sierra HD (2020+)
Product #102163
Description
***This kit is for Standard bed length only, it will not fit the Long Bed (8 foot). Email us (support@builtrightind.com) to get added to the Long bed waiting list we hope to add later in 2024****
Just because you have a lot of gear, doesn’t mean you have to have a lot of mess. While standard storage might not cut it, the BuiltRight Industries Bedside Rack System can. Using the same factory mounting points, the rack system installs to keep your gear organized, easily accessible and secure. They work with all MOLLE/PALS accessories in addition to universal slots for all kinds of storage possibilities. Proudly made in USA with a Lifetime Warranty.
Check out the videos below to see the process our engineering team used to design, prototype and test the HD MOLLE panel kit!
Designing MOLLE Panels for the 2020+ GMC and Chevy HD Trucks
Prototyping the 2020+ GM HD Bedside MOLLE Panel Kit
Engineering
In the 2020+ GMC/Chevrolet HD lineup, each truck bed is equipped with three oval shaped holes in the bedside. Used along with the tie down loops near the front and rear, the Silverado and Sierra is very well equipped to support a full length MOLLE panel system. The BuiltRight Modular Bedside Rack System installs using these factory mounting points, without the need for modification to the vehicle. The panels provide MOLLE-compatible features for the use of MOLLE/PALS accessories in addition to universal slots for an infinite number of possibilities.
The Silverado and Sierra panels can be used as a 4pc kit, of course, but you can also order just one side or the other. This allows users to setup their truck as needed and add to their system if their gear mounting needs change.
- Store items that need to be easily accessible and organized
- Keep tools, straps, shackles, etc from rolling around in the bed of your truck
- Easily configured depending on intended use
- Made in USA. Lifetime Warranty.
Fitment:
- 2020+ Chevrolet Silverado HD 6ft4in Bed
- 2020+ GMC Sierra HD 6ft4in Bed
- Not compatible with Carbon Pro beds or 8ft bed YET
Kit Includes:
- All necessary panels
- Hardware kit w/ support brackets
Install
Click here to visit our Support site for all relevant installation information.
Installation is quick and easy. Remove the plastic covers plugging the oval shaped holes in the bed. Prepare the support brackets and tie down blocks and install them, snug but not fully tight. Install the rear panel and loosely bolt into place using tie down blocks. Loosely install the front panel in the same manner. Bolt the two panels together using the included stainless bolts. At this point, you may find that you need to adjust support brackets slightly front to back to accomodate desired fit. Tighten all hardware and you're done. Expect to spend 15-20min per side.
Kit includes all hardware necessary for installation. Users that have OEM Tie Down Anchors can choose to leave them in place instead of using the included hardware in some or all locations.
Engineering
Installation
Fitment
Pairs well with
Bedside Rack System | Chevrolet Silverado HD & GMC Sierra HD (2020+)
'Block & Slot' Pattern
The term MOLLE has become a bit of a buzzword in recent years and many imitation products have latched onto it, simply cutting square or rectangles into their products. The BuiltRight 'Block and Slot' pattern offers slotted features, designed for use with common 1/4" mounting hardware in addition to correct MIL-SPEC MOLLE/PALS features. Finally, the BuiltRight MOLLE Nuts (sold separately) offer an additional mounting location with a 1/4-20 threaded hole for easy installation.
The Design Process
BuiltRight is an engineering company before all else and we're obsessed with great mechanical design. Each product has a story of ideas, innovation and iteration until it's just right.
Your Bedside Rack System started as a 3D scan of multiple truck beds, in order to understand the manufacturing tolerances that Ford, GM, etc hold themselves to. We then use that data along with CAD files provided by our OEM partners to design parts that will fit your truck perfectly.
Finally, we test those parts using finite element analysis on the computer before sending them out to our network of product testers around the world. Real-world testing happens in Baja, on ranches and job sites across the country and on the icy, salty roads from the Midwest to the Northeast.
Why Buy From BuiltRight?
Lifetime Warranty
Consider this a no-BS, satisfaction guaranteed, no questions asked promise. Here's the thing - you won't need it. On average, we process one warranty claim for every 9,827 products we ship.
American Made
BuiltRight products are proudly made right here in the US using the highest quality domestic materials we can get our hands on. When it comes to safety, think twice before choosing to trust a cheap imitation.
Setup Assistance
Looking for advice on how to setup your gear? Needs some help with an installation? We're all 'truck guys' here, so technical support from somebody who uses our products is just a call or email away.
