Bedside Rack System - Driver's Rear Panel | Jeep Gladiator (2020-2024)
Product #102111
Description
Just because you have a lot of gear, doesn’t mean you have to have a lot of mess. While standard storage might not cut it, the BuiltRight Industries Bedside Rack System can. Using the same factory mounting points, the rack system installs to keep your gear organized, easily accessible and secure. They work with all MOLLE/PALS accessories in addition to universal slots for all kinds of storage possibilities. Proudly made in USA with a Lifetime Warranty.
Engineering
Product development began with a 3D scan of the Gladiator bed and moved quickly into the first of six prototype kits. We use a combination of experience (military weapon system design, vehicle component engineering), computer aided analysis (known as FEA) and mostly importantly, good old fashioned test miles to revise and refine the design. In the pursuit of the best possible solution, we set no deadlines and aren’t afraid to make dramatic design changes and it shows in the finished product.
Each panel is manufactured using cutting edge CNC equipment and high-quality domestic materials. A sheet of 1/8in steel plate is fed into a combination turret punch and laser. The turret punch uses custom tooling to punch burr-free rectangular and slotted features into the panel before the laser cuts the more complex profiles. You’ll notice that out panels feature no 90 degree corners or sharp angles. This is to allow the panel to transfer load into the bedside while minimizing stress concentrations. The combination of manufacturing processes is a perfect fit for this design. Finally, each panel is CNC formed and inspected before heading out for a durable black texture powder coat.
- Keep gear safe, secure and organized for when you need it most.
- Each panel features our usual pattern of MIL-STD MOLLE rectangles and oversized 1/4in slots, perfect for attaching clamps and accessories easily, with any hole spacing, using 1/4in carriage bolts
- Driver side and passenger side rear panels offer clearance for the tie-down loop Passenger side panel has cutout for bed power outlet (available on some models)
- Patented U.S. Patent No. 10,933,796 B2, additional patents pending
Fitment:
- Jeep Gladiator JT (2019 - current)
- It’s addressed in the installation section below, but installation will require the OEM Trail Rail System or the 2020 Jeep Gladiator Utility Rail BuiltRight Utility Rail System
Install
The BuiltRight Bedside Rack System for the Jeep Gladiator mounts directly to the factory Trail Rail system or using our Utility Rail System (coming soon). Non-invasive installation keeps OEM Trail Utility Rail in it’s original location, ensuring that it’s load capacity isn’t reduced and preserving stock rail location/spacing for current and future accessories. Simply place the T-Slot nuts into the rail, move the panel into place and use the included hardware to fasten the panel to the rail. Larger panels will also use a lower mounting point, near the tie-down loop, for additional rigidity.
Engineering
Installation
Pairs well with
Bedside Rack System - Driver's Rear Panel | Jeep Gladiator (2020-2024)
'Block & Slot' Pattern
The term MOLLE has become a bit of a buzzword in recent years and many imitation products have latched onto it, simply cutting square or rectangles into their products. The BuiltRight 'Block and Slot' pattern offers slotted features, designed for use with common 1/4" mounting hardware in addition to correct MIL-SPEC MOLLE/PALS features. Finally, the BuiltRight MOLLE Nuts (sold separately) offer an additional mounting location with a 1/4-20 threaded hole for easy installation.
The Design Process
BuiltRight is an engineering company before all else and we're obsessed with great mechanical design. Each product has a story of ideas, innovation and iteration until it's just right.
Your Bedside Rack System started as a 3D scan of multiple truck beds, in order to understand the manufacturing tolerances that Ford, GM, etc hold themselves to. We then use that data along with CAD files provided by our OEM partners to design parts that will fit your truck perfectly.
Finally, we test those parts using finite element analysis on the computer before sending them out to our network of product testers around the world. Real-world testing happens in Baja, on ranches and job sites across the country and on the icy, salty roads from the Midwest to the Northeast.
Why Buy From BuiltRight?
Lifetime Warranty
Consider this a no-BS, satisfaction guaranteed, no questions asked promise. Here's the thing - you won't need it. On average, we process one warranty claim for every 9,827 products we ship.
American Made
BuiltRight products are proudly made right here in the US using the highest quality domestic materials we can get our hands on. When it comes to safety, think twice before choosing to trust a cheap imitation.
Setup Assistance
Looking for advice on how to setup your gear? Needs some help with an installation? We're all 'truck guys' here, so technical support from somebody who uses our products is just a call or email away.
