Bedside Rack System | RAM (2009-2019)-BuiltRight Industries
Bedside Rack System | RAM (2009-2019)-BuiltRight Industries
Features

Introducing the BuiltRight Industries Bedside Rack System for the 2009 to 2019 classic RAM truck. Two variations, one for the 5’7” bed and one for the 6’4” bed, are currently available and each will fit on either side of your truck, allowing you to switch sides or mix and match as needed. Pictured above is the 5’7” bedside rack kit. The 6’4” kit has a front panel that is nearly identical in side to the rear panel.

Fitment

Fits: 2009 - 2019 RAM Trucks

* Fitment Note: At this time, we cannot confirm fitment compatibility with all drop-in bedliner systems, as the various manufacturers take different approaches that are difficult to account for. The same applies to some hard cover tonneau covers with clamps that can't be repositioned. Some customization may be required in those cases.

Engineering & Manufacturing

In the 4th Gen (09-19 classic) RAM lineup, the inner bedsides of the truck offer no threaded mounting points for accessories. After much experimentation, we found that the correct solution to this is for users to install rivet nuts using the included drill templates. This design uses 4 rivet nuts per panel, for a total of 8 to install a full side kit. The BuiltRight Bedside Rack System then installs securely using these mounting points. The panels provide MOLLE-compatible features for the use of MOLLE/PALS accessories in addition to universal slots for an infinite number of possibilities.

– Store items that need to be easily accessible and organized
– Keep tools, straps, shackles, etc from rolling around in the bed of your truck
– Easily configured depending on intended use

Installation



Part #102074

Bedside Rack System | RAM (2009-2019)

7 reviews

Introducing the BuiltRight Industries Bedside Rack System for the 2009 to 2019 classic RAM truck. Two variations, one for the 5’7” bed and one for the 6’4” bed, are currently available and each will fit on either side of your truck, allowing you to switch sides or mix and match as needed. Pictured above is the 5’7” bedside rack kit. The 6’4” kit has a front panel that is nearly identical in size to the rear panel.

Cost

Regular price $225.00
/

Introducing the BuiltRight Industries Bedside Rack System for the 2009 to 2019 classic RAM truck. Two variations, one for the 5’7” bed and one for the 6’4” bed, are currently available and each will fit on either side of your truck, allowing you to switch sides or mix and match as needed. Pictured above is the 5’7” bedside rack kit. The 6’4” kit has a front panel that is nearly identical in side to the rear panel.

Fits: 2009 - 2019 RAM Trucks

* Fitment Note: At this time, we cannot confirm fitment compatibility with all drop-in bedliner systems, as the various manufacturers take different approaches that are difficult to account for. The same applies to some hard cover tonneau covers with clamps that can't be repositioned. Some customization may be required in those cases.

In the 4th Gen (09-19 classic) RAM lineup, the inner bedsides of the truck offer no threaded mounting points for accessories. After much experimentation, we found that the correct solution to this is for users to install rivet nuts using the included drill templates. This design uses 4 rivet nuts per panel, for a total of 8 to install a full side kit. The BuiltRight Bedside Rack System then installs securely using these mounting points. The panels provide MOLLE-compatible features for the use of MOLLE/PALS accessories in addition to universal slots for an infinite number of possibilities.

– Store items that need to be easily accessible and organized
– Keep tools, straps, shackles, etc from rolling around in the bed of your truck
– Easily configured depending on intended use


Customer Reviews
3.7 Based on 7 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
A
05/01/2021
Anonymous
United States United States
One sided story

First of all when I purchased my bedside rack system it was not clear I was only purchasing one side, even after purchasing I revisited the website to make sure now I see a “complete “ bedside rack system offered that wasn’t there when I made my original order which is 25.00 cheaper than buying individual sides. Can those of us that bought a single side and want another side purchase it without the 25.00 mark up ?

A
05/01/2021
Anonymous
United States United States
One sided story

First of all when I purchased my bedside rack system it was not clear I was only purchasing one side, even after purchasing I revisited the website to make sure now I see a “complete “ bedside rack system offered that wasn’t there when I made my original order which is 25.00 cheaper than buying individual sides. Can those of us that bought a single side and want another side purchase it without the 25.00 mark up ?

PS
04/27/2021
Patti S.
United States United States
What a Awesome Company

Still in the process of installation. Really appreciate all the great feedback from the emails and product support.

PR
04/08/2021
Pedro R.
United States United States
Great customer service

Matt was very responsive to my emails and made me feel like a valuable customer.

BuiltRight Industries Bedside Rack System | RAM (2009-2019) Review
S
03/16/2021
Sten
United States United States
Great Product and Works With The Softopper

Installation was straight forward and the panels are very well built. I'm extremely happy with they way they mounted and the way they look. A few recommendations: If you can mount your accessories (quick fist, etc) before you make the final install on the bed it will make your life easier. The nuts can be a challenge to get back there once its installed. If you have the factory 5th wheel plug on the left side of your bed... it will cover it up and make it unusable without modifying the rack. I have the Softopper installed and the rack interfered with the forward most hold down bracket on the topper. Added a piece of Trex to the underside of the top rail of the bed and a longer bolt in the topper bracket and it works great. Attached are some pictures. Overall, it's great and I will be ordering another one for the other side. Thanks Builtright!!

BuiltRight Industries Bedside Rack System | RAM (2009-2019) ReviewBuiltRight Industries Bedside Rack System | RAM (2009-2019) ReviewBuiltRight Industries Bedside Rack System | RAM (2009-2019) ReviewBuiltRight Industries Bedside Rack System | RAM (2009-2019) Review

Keep your office organized

Introducing the BuiltRight Tech Plates