Bedside Rack System | RAM (2009-2019)-BuiltRight Industries
Bedside Rack System | RAM (2009-2019)-BuiltRight Industries
Features

*** This product is currently in it’s pre-production testing phase. If you are not a BETA tester (notified via email), an order placed now will reserve your place and ship when our first full production run is complete. We’re currently estimating that this will be by the end of August, but that is subject to slight change based on revisions required (if any) after BETA testing. ***

Introducing the BuiltRight Industries Bedside Rack System for the 2009 to 2019 classic RAM truck. Two variations, one for the 5’7” bed and one for the 6’4” bed, are currently available and each will fit on either side of your truck, allowing you to switch sides or mix and match as needed. Pictured above is the 5’7” bedside rack kit. The 6’4” kit has a front panel that is nearly identical in side to the rear panel.

Fitment

Fits: 2009 - 2019 RAM Trucks

* Fitment Note: At this time, we cannot confirm fitment compatibility with all drop-in bedliner systems, as the various manufacturers take different approaches that are difficult to account for. The same applies to some hard cover tonneau covers with clamps that can't be repositioned. Some customization may be required in those cases.

Engineering & Manufacturing

In the 4th Gen (09-19 classic) RAM lineup, the inner bedsides of the truck offer no threaded mounting points for accessories. After much experimentation, we found that the correct solution to this is for users to install rivet nuts using the included drill templates. This design uses 4 rivet nuts per panel, for a total of 8 to install a full side kit. The BuiltRight Bedside Rack System then installs securely using these mounting points. The panels provide MOLLE-compatible features for the use of MOLLE/PALS accessories in addition to universal slots for an infinite number of possibilities.

– Store items that need to be easily accessible and organized
– Keep tools, straps, shackles, etc from rolling around in the bed of your truck
– Easily configured depending on intended use

Installation

Part #102074

Bedside Rack System | RAM (2009-2019)

2 reviews

*** This item is out of stock. Orders placed today will ship mid-late December. ***

Introducing the BuiltRight Industries Bedside Rack System for the 2009 to 2019 classic RAM truck. Two variations, one for the 5’7” bed and one for the 6’4” bed, are currently available and each will fit on either side of your truck, allowing you to switch sides or mix and match as needed. Pictured above is the 5’7” bedside rack kit. The 6’4” kit has a front panel that is nearly identical in size to the rear panel.

Cost

Regular price $225.00 Sale price $195.00 Save $30.00
/

*** This product is currently in it’s pre-production testing phase. If you are not a BETA tester (notified via email), an order placed now will reserve your place and ship when our first full production run is complete. We’re currently estimating that this will be by the end of August, but that is subject to slight change based on revisions required (if any) after BETA testing. ***

Introducing the BuiltRight Industries Bedside Rack System for the 2009 to 2019 classic RAM truck. Two variations, one for the 5’7” bed and one for the 6’4” bed, are currently available and each will fit on either side of your truck, allowing you to switch sides or mix and match as needed. Pictured above is the 5’7” bedside rack kit. The 6’4” kit has a front panel that is nearly identical in side to the rear panel.

Fits: 2009 - 2019 RAM Trucks

* Fitment Note: At this time, we cannot confirm fitment compatibility with all drop-in bedliner systems, as the various manufacturers take different approaches that are difficult to account for. The same applies to some hard cover tonneau covers with clamps that can't be repositioned. Some customization may be required in those cases.

In the 4th Gen (09-19 classic) RAM lineup, the inner bedsides of the truck offer no threaded mounting points for accessories. After much experimentation, we found that the correct solution to this is for users to install rivet nuts using the included drill templates. This design uses 4 rivet nuts per panel, for a total of 8 to install a full side kit. The BuiltRight Bedside Rack System then installs securely using these mounting points. The panels provide MOLLE-compatible features for the use of MOLLE/PALS accessories in addition to universal slots for an infinite number of possibilities.

– Store items that need to be easily accessible and organized
– Keep tools, straps, shackles, etc from rolling around in the bed of your truck
– Easily configured depending on intended use

Customer Reviews
4.5 Based on 2 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
JR
11/01/2020
John R.
United States United States
I recommend this product
Great rack!!

I have the Beta version(pre- production model), the install was straight forward and pretty simple. With it installed, it cleaned up the bed of the truck nicely. I only have a few things mounted so far, but more to come. The quality and craftsmanship is great. I would recommend this for anyone looking to organize their bed.

BuiltRight Industries Bedside Rack System | RAM (2009-2019) ReviewBuiltRight Industries Bedside Rack System | RAM (2009-2019) ReviewBuiltRight Industries Bedside Rack System | RAM (2009-2019) ReviewBuiltRight Industries Bedside Rack System | RAM (2009-2019) ReviewBuiltRight Industries Bedside Rack System | RAM (2009-2019) Review
TP
09/12/2020
Tim P.
Bedside rack system 2018 Ram 2500 power wagon

Just installed it, the install wasn't too bad there are a couple of changes that I would do to make the install a little easier. I would glue or tack weld the little spacers to the backside of the mounting brackets and I would make the bed light switch more accessible by opening up the rack a little in that area. It is a little light trying to get your finger in there to turn the lights on or off. I realize this is the prototype and really like the unlimited options I now have with the rack system. Overall a great product. One other thing i do wish that these were more universal in the mounting locations meaning I wish that I could have used the front rack in the spot on the rear back location. I see myself using 2 back racks more than a rack in the front. (having the bed led lights precluded me from using the front rack in the place of the the rear rack, the rack wasn't cut out to accept the led light)

Keep your office organized

Introducing the BuiltRight Tech Plates